Hydranautics membranes // Dear Customers, if you need advice on choosing a suitable membranes, product comparison or membrane design, please feel free to contact us via e-mail sales@dcsolutions.cz.

Hydranautics ESPAB MAX

Price exc. VAT: 565.00

Price inc. VAT (21%): 683.65

Normal Price: 670.00

You save: 105.00

Estimated delivery: On request

Individual offer for 10+ pcs. Please use our get a quote form.

 

ESPA2 reverse osmosis membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. ESPA2 reverse osmosis membranes offer highest energy efficiency at lowest costs and are used in large municipal wastewater reclamation plants. ESPAB are low pressure brackish water reverse osmosis membranes having a high rejection for boron.

ESPA2-LD reverse osmosis membrane is available in diameters of 4.0 and 8.0 inches.

The ESPA2 reverse osmosis membranes are available in the LD variant. Low differential LD Technology® models are offered to minimize colloidal fouling when used with conventional pre-treatment equipment. These reverse osmosis membranes offer consistently low feed pressures and longer intervals between cleanings. ESPA2 and ESPAB  reverse osmosis membranes are available in the MAX variant with 440 ft2 (40.9 m2) active membrane surface area. Increased membrane area reduces capital costs by requiring fewer pressure vessels and less floor space.

Innovations have enabled us to offer the ESPA2-LD MAX reverse osmosis membranes which have a membrane area of 440 ft2 (40.9 m2) and use 34 mil feed spacer.

 

General Product Description*  
Size: 8″ diameter & 40″ length
Permeate Flow: 9,000 gpd (34.1 m3 /d)
Salt Rejection: 99.3% (99.0% minimum)
Configuration: Spiral Wound
Membrane Polymer: Composite Polyamide
   
Product Use and Restrictions  
Maximum Applied Pressure: 600 psig (4.14 MPa
Maximum Chlorine Concentration: < 0.1 ppm
Maximum Operating Temperature: 113 °F (45 °C)
pH Range, Continuous (Cleaning): 2-11 (1-12.5)
Maximum Feedwater Turbidity: 1.0 NTU
Maximum Feedwater SDI (15 mins): 5.0
Maximum Feed Flow: 75 gpm (17.0 m3 /h
Maximum Pressure Drop for Each Element: 15 psi (0.10 MPa)
   
   
*Please refer to standard testing conditions and details in the enclosed datasheet

 

Alternative to: 
Toray
TM720C-440