Description
PRODUCT SPECIFICATIONS | ||||||||
Product name | Item no. | Element type | Active membrane area | Permeate flow rate | Typical rejection | Minimum rejection | Feed water | Pressure |
Aquaporin Inside® CLEAR Ultra 8040 element | 40103 | Fiberglass, wet | 440 ft² 41 m² |
13,500 GPD | 99.0% | 98.0% | 500 ppm NaCl |
100 psi (6.9 bar) |
The stated product performances are tested at 25°C (77°F), 15% recovery, pH 7-8. Permeate flow rate and rejections are stated after a minimum of 60 min operation. | ||||||||
Individual element permeate flow rate may vary ± 15%. |
ELEMENT DIMENSIONS | ||||
Product name | A | B | C | |
Aquaporin Inside® CLEAR Plus 8040 element | 40.0 / 1016.0 | 7.9 / 200 | 1.125 / 28.6 | |
Dimensions (inches / millimeters) |
OPERATING SPECIFICATIONS | |||
Maximum operating pressure |
41.4 bar (600 psi) | Maximum feed water turbidity | 1 NTU |
Maximum feed flow rate | 17 m3/h (75 gpm) | pH range (operation) | 3–10 |
Maximum operating temperature | 45°C (113°F) | pH range (short-term cleaning, 25°C / 77°F) | 1–12 |
Maximum pressure drop | 0.7 bar (10 psi) | Free chlorine tolerance | < 0.1 ppm |
Maximum feed water SDI | 5 (15 min) |
ADDITIONAL INFORMATION |
Permeate from the first hour of operation should be discarded. Do not use this initial permeate for consumption. |
To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution. Rinse out the preservative solution before use. |
Elements contained in the boxes must be kept dry at room temperature (5–35°C / 41–95°F) and should not be stored in direct sunlight. |
Keep elements moist at all times after initial wetting. |
The presence of free chlorine and other oxidizing agents can cause premature membrane failure. Since oxidation damage is not covered under warranty, Aquaporin A/S recommends removing residual free chlorine by pretreatment prior to membrane exposure. |
The information provided in this document is for informative purposes only. It is the responsibility of the user to ensure appropriate usage of this product. Aquaporin A/S assumes no obligation, liability, or damages incurred for the misuse of the product. This document does not express or implies any warranty as to the merchantability or fitness of the products. |
Weight | 15 kg |
Aquaporin is a water technology pioneer, headquartered in Denmark with operations in Singapore, Turkey, the United States, and China. We are committed to rethinking water filtration with biotechnology to solve global water challenges. Our groundbreaking Aquaporin Inside® technology, inspired by nature and rooted in Nobel Prize-awarded research, is integrated into all our solutions and used to clean water in industries, in our homes, and by NASA in space.
From treating industrial wastewater to concentrating valuables and enhancing drinking water quality and accessibility, we collaborate with partners worldwide to address water challenges responsibly.